Aquaprime-99 Water proofing Solution


SKU: N/A Category:

Aquaprime -99 TM

Ultimate Bonding & Water Resistance

(On Vertical Cementious Surface – Exterior /Interior)

Aquaprime – 99 TM plays a major role in the facade coating system.  It forms a dry water repellent zone beneath the coating consolidate the substrate and enhance the bonding of the coating. It is gas permeable, durable, protects paints & plasters against harmful influences from within the masonry.

Key features: Engineer Plus Aquaprime -99 TM is a water-based acrylic polymer specially designed for tough onding of concrete /plaster/paint on Aquasil-99 treated surface.


  • Fast-drying, excellent adhesion to most building materials & no need to cure.
  • Increase in durability & toughness of concrete.
  • Increase flexural and bond strength of concrete.
  • Forms a very tough bond with a substrate having a good permeability rating.
  • High scrub & impact resistance
  • Excellent elastomeric and crack bridging capability.
  • Good weathering characteristics.
  • No water absorption, withstanding hydrostatic pressure.
  • Not susceptible to alkali degradation. Resistance to high alkali, sulfates, and salts.
  • Good color retention. High resistance to stain,  dirt pickup & UV.
  • Breathable coating, allows vapor transmission.

Technical View :

Product:- Aquaprime-99 TM

Physical form:- Milky white free flow liquid

Odor:- low characteristic

Specific gravity:- 1.03 .02

Solids:- 35 % + 1%

PH:- 7-9

Solubility:- Readily soluble in water

Surface drying:- 5 minutes

Solubility  after drying:- fully stable, not soluble in water

Flashpoint:- non-flammable (water base)

 Precaution & Limitations :-

  • Avoid contact with skin & eyes.
  • Put on goggles & gloves while handling the product. In case of contact with eyes or skin wash with plenty of water immediately.
  • Don’t keep container open, replace the cap. Store in a cool & dry place in its original packing.

How to use :

  • Clean the surface from oil, dust, fungus, grassroots, rust & lose material with a wire brush, or any mechanical tool. Vacuum cleaning is suggested for the best result. Wash the surface with clean water by cloth or sponge and let it dry fully.
  • Mix three-component with vigorous stirring in sequence as under

Potable water + Aquasil-99+ Aquaprime 99 TM 20 parts + 1 part  + 2 parts

  • Apply the mix by painting brush, roller or spray on the clean washed and dried surface till the saturation of the surface.


The recommendation given herewith should be checked by preliminary trials because of conditions during processing over which the company. ICO LTD has no control. The guideline for use does not constitute a warranty either expressed or implied of the fitness or suitability of the product for a particular purpose.

Aquaprime-99 Water proofing Solution



There are no reviews yet.

Be the first to review “Aquaprime-99 Water proofing Solution”

Your email address will not be published. Required fields are marked *